10/00
4-18
Phaser 790/DocuColor 2006
REP 4.5
Initial Issue
Repairs and Adjustments
REP 4.5 Drive Motor PWB
Parts List on PL 10.1
Removal
WARNING
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Remove the Rear Cover (REP 14.6).
3. Remove the Drive Motor PWB (Figure 1).
Replacement
1. Reinstall the Drive Motor PWB in the reverse order of removal.
Figure 1 Removing the Drive Motor PWB
1
Disconnect the
four connec-
tors
2
Remove the
screws
3
Remove the Drive
Motor PWB
To Next Page
Loading...
Need help?
General
