Xerox Phaser 790 User Manual

10/00
4-83
Phaser 790/DocuColor 2006
REP 8.35, REP 8.36
Repairs and Adjustments
Initial Issue
REP 8.35 Inverter/Lower Assembly
Parts List on PL 15.5
Removal
WARNING
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Remove the Feeder Left Cover.
3. Remove the Inverter/Lower Assembly. (Figure 1)
Figure 1 Removing the Inverter/Lower Assembly
Replacement
1. Perform the removal procedure in reverse.
REP 8.36 Inverter Motor
Parts List on PL 15.5
Removal
WARNING
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Remove the Inverter/Lower Assembly. (REP 8.35)
3. Remove the Rear Inverter Cover. (Figure 1)
Figure 1 Removing the Rear Inverter Cover
1
Disconnect the
connector
2
Loosen the thumb screws
1
Loosen two
screws
2
Remove the Rear
Inverter Cover

Xerox Phaser 790 Specifications

General

Brand	Xerox
Model	Phaser 790
Category	Copier
Language	English