Mitsubishi GOT1000 Series User Manual

29.3 Compatible Software
29 - 7
25
BAR CODE READER CONNECTION
26
PRINTER CONNECTION
27
CNC CONNECTION
28
MULTI-CHANNEL FUNCTION
29
FA TRANSPARENT FUNCTION
30
MULTIPLE-GT11 CONNECTION FUNCTION
31
GATEWAY FUNCTION INDEX
29.3 Compatible Software
The following shows the software compatible with the FA transparent function.
(1) The range accessible by software when FA transparent function is used
Use of the FA transparent function does not affect the range accessible by the
software.
For details on accessible range, refer to the manual for the respective software.
(2) The software settings when using FA transparent function
For the software settings, refer to the following when using FA transparent
function.
Section 29.4.4 Accessing the PLC by the GX Developer
Section 29.4.5 Accessing the inverter by the FR Configurator
1 Connecting the GOT and PC with RS-232
(1) Bus connection
The following shows the software and the accessible PLC CPUs.
*1 GX Developer Version 8 or later is required to use the FA transparent function.
(2) Direct CPU connection
The following shows the software and the accessible PLC CPUs.
*1 FR Configurator Version 1.02 or later is required to use the FA transparent function.
PLC CPU Software
Q/QnA/ACPU,
motion controller CPU (A Series)
GX Developer
*1
PLC CPU Software
Q/QnA/ACPU GX Developer
FXCPU GX Developer, FX-PCS/WIN
Motion controller CPU (Q Series)
MT Developer
Motion controller CPU (A Series)
GX Developer
SW3RN-GSV13P, SW3RN-GSV22P, SW3RN-GSV43P,
SW3RN-GSV51P
FREQROL A700/F700 Series
FR Configurator
*1

Mitsubishi GOT1000 Series Specifications

General

Brand	Mitsubishi
Model	GOT1000 Series
Category	Touch terminals
Language	English