2 - 28
2.2 Preparatory Procedures for Monitoring
2.2.2 Checking OS installation on GOT
2.2.2 Checking OS installation on GOT
Check if the OS is properly installed or not on the Drive information tab of GT Designer2.
For the operation on the Drive information tab, refer to the following manual.
GT Designer2 Version Basic Operation/Data Transfer Manual
Section 2.4
Communication
Check Sheet
After making sure at the Drive information that the OS has been successfully
installed on the GOT, mark the check sheet.
OS selection (Standard monitor OS, Communication driver, Option OS)
The OS has been installed successfully on the GOT
if the following can be confirmed:
1) Standard monitor OS
2) Communication driver (either of the following):
• Bus(Q)
• Bus(A/QnA)
Check
To Next Page
Loading...
Need help?
General
