Mitsubishi GOT1000 Series User Manual

2.1 System Configuration
2.1.6 Connecting to motion controller CPU (A273UCPU, A273UHCPU(-S3), A373UCPU(-S3))
2 - 17
1
OVERVIEW
2
BUS CONNECTION
3
DIRECT CONNECTION TO CPU
4
COMPUTER LINK CONNECTION
5
MELSECNET/10 CONNECTION (PLC TO PLC NETWORK)
6
CC-Link CONNECTION (INTELLIGENT DEVICE STATION)
7
CC-Link CONNECTION (Via G4)
8
ETHERNET CONNECTION
(2) When using the extension base unit
*1 This includes the extension cable length (between the base unit and the extension base unit).
*2 The number of connectable GOTs is limited by the type of the connected CPU and the number of the intelligent
function modules.
Section 2.3 When connecting multiple GOTs
Bus connector conversion box
A bus connector conversion box is required when installing the first GOT in a place
2.5m or more away from the main base unit (6.6m or more when using an extension
base unit.)
Connection conditions
System configuration
Number of
GOTs
*2
Distance from main
base unit to 1st GOT
1
6.6m or less
More than 6.6m
2
6.6m or less
More than 6.6m
3 6.6m or less
MAX6.6m
*1
Connection cable
9
Connection
Cable
5
1
MAX6.6m
*1
Connection
cable
6
Connection cable
7
Bus connector conversion box
3
MAX36.6m
*1
Connection
Cable
5
1
MAX6.6m
*1
Connection cable
9
Connection cable
8
MAX36.6m
*1
Connection
Cable
5
12
MAX6.6m
*1
Connection
cable
6
Connection
cable
7
3
Connection cable
8
MAX30m
MAX36.6m
*1
Connection
Cable
5
2 1
Bus connector
conversion box
MAX6.6m
*1
Connection cable
9
Connection cable
8
Connection cable
8
MAX30m
MAX36.6m
*1
Connection
Cable
5
2 12

Mitsubishi GOT1000 Series Specifications

General

Brand	Mitsubishi
Model	GOT1000 Series
Category	Touch terminals
Language	English