Mitsubishi GOT1000 Series User Manual

4 - 2
4.1 System Configuration
4.1.1 Connecting to QCPU (Q mode)
4.1 System Configuration
Select a system configuration suitable for your application.
Conventions used in this section
Numbers (e.g. ) of System configuration and connection conditions correspond
to the numbers (e.g. ) of System equipment.
Use these numbers as references when confirming models and applications.
4.1.1 Connecting to QCPU (Q mode)
1 System configuration and connection conditions
*1 Direct connection from the GOT to a basic model QCPU is recommended. For this reason, the GOT does not
support the serial communication function of the basic model QCPU.
( Section 3.1.1 Connecting to QCPU)
Connection conditions
System configuration
*1
Number of
GOTs
Distance
1
15m or less
1200m or less
A/QnA/QCPU,QJ71C24, MELDAS C6*
Communication driver
1
MAX15m
RS-232 cable 1)
7
Serial communication module
43
MAX1200m
RS-422 cable
8
Serial communication module
53
2

Mitsubishi GOT1000 Series Specifications

General

Brand	Mitsubishi
Model	GOT1000 Series
Category	Touch terminals
Language	English