Mitsubishi GOT1000 Series User Manual

2 - 26
2.2 Preparatory Procedures for Monitoring
2.2 Preparatory Procedures for Monitoring
The following shows the procedures to be taken before monitoring and corresponding reference sections.
Install the OS onto the GOT.
Section 2.2.1
Installing OS onto GOT
Make sure that the OS is installed on the GOT.
Section 2.2.2
Checking OS installation on GOT
Set the communication interface. (Communication
settings)
Section 2.2.3
Setting communication interface
(Communication settings)
Download the project data.
Section 2.2.4
Downloading project data
Attach the communication unit and connect the cable.
Section 2.2.5
Attaching communication unit and
connecting cable
Make sure that the GOT recognizes the connected
equipment.
Section 2.2.6
Verifying GOT recognizes connected
equipment
Make sure that monitoring is performed normally.
Section 2.2.7
Checking for normal monitoring

Mitsubishi GOT1000 Series Specifications

General

Brand	Mitsubishi
Model	GOT1000 Series
Category	Touch terminals
Language	English