Engaging reversegear R
#
Depress thebrake pedal and push the
DIRECT SELECTleverupwards pastthe first
point of resistance.
Transmission position display k is shown in
themultifunction display.
Selecting neutral N
&
WARNING Risk of accident and injury
when neutralposition is engaged
If youparkthe vehicle withthe transmission
in neutral position i and theparking brake
is notengaged, thevehicle mayroll away.
Thereisarisk of accident and injury.
#
Beforeparkingthe vehicle, apply the
parking brake.
#
Press thebrake pedal and theDIRECT
SELECT leverupwards or downwardstothe
firstpoint of resistance.
Transmission position display i is shown in
themultifunction display.
Releasing thebrake pedal will allowyou to move
thevehicle freely,e.g. to push it or towit.
If theautomatic transmission should also
stay in neutral ii when theignition is
switched off, carry out thefollowing:
#
Startthe vehicle.
#
Depress thebrake pedal and shifttoneutral
i.
#
Release thebrake pedal.
#
Switchoff theignition.
%
If youthen leave thevehicle and theSmart‐
Keyisstillinthe vehicle, theautomatic trans‐
mission will stay in neutral i from then on.
Engaging parkposition P
#
Press button 1.
Transmission position display j is shown in
themultifunction display.
Park position j is engaged automaticallywhen
one of thefollowing conditionsismet:
R
Youswitch offthe engine in transmission
position h or k.
R
Youopen thedriver's door when thevehicle is
stationaryorwhen drivingataverylow speed
and in transmissionposition h or k.
R
Youopen theseat belt buckle when thevehi‐
cle is stationaryorwhen drivingataverylow
speed.
R
Youleave your seat when thevehicle is sta‐
tionaryorwhen drivingataverylow speed.
Driving and parking
117
To Next Page
Loading...
Need help?
General
