Adjustingarmrests
Exampleimage
#
To setthe armrestinclination: fold thearm‐
rest morethan 45 °upwards 2.
The armrestisreleased.
#
Fold thearmrest forwards 3 as farasitwill
go.
#
Slowly fold thearmrest upwards intothe
required position.
#
To fold thearmrest upwards: if necessary,
fold thearmrest morethan 90 °upwards 1.
Folding thefolding seat up or down
&
WARNING Risk of injury when using the
folding seat due to insertedkey
When thekey is in thelockofthe partition
sliding door,itcan come intocontact withthe
person on thefolding seat.
#
Alwaysremove thekey from theparti‐
tion sliding door beforeaperson sits on
thefolding seat.
#
Remove key 1 from thepartition sliding
door.
#
Press thepush button on catch 2 and fold
seat cushion 3 up or down.
#
Release push button on catch 2 when seat
cushion 3 reaches its end position.
#
Move seat cushion 3 until it has locked. The
push button on catch 2 mustbecompletely
flush withthe seat frame.
Installing and removing the rear bench seat
&
WARNING Risk of injury if rear bench
seat is installed incorrectly
If youdonot install therear benchseat as
described, or install an unsuitable rear bench
seat, theseat belts maynot provide theinten‐
ded protection.
#
Install therear benchseat as described
and only in thedirection of travel.
#
Installing therear benchseat in the
oppositedirection is notpermitted.
#
Use onlyrear benchseats approvedfor
your vehicle by Mercedes-Benz.
&
WARNING Risk of injury if therear bench
seat is notlockedinplace
If thelocking mechanisms on therear bench
seat legs arenot correctly engaged, therear
benchseat will notbeheld firmly and could
roll overduring travel.
#
Ensurethat therear benchseat is
engaged beforesetting off. Theremust
be no redindicator tabs visible on the
release handle.
Seatsand stowage
67
To Next Page
Loading...
Need help?
General
