Mercedes-Benz Sprinter 2019 User Manual

#
Lowbeam/perimeterlights: pull back
housing cover 1.
#
Pullout thesockettowards therear.
#
Remove thebulb from thesocket.
#
Insert thenew bulb intothe socketsuchthat
thebase of thebulb restsfullyagainstthe
base of thesocket.
#
Align and insertthe socket.
#
Attach housing cover 1.
#
High beam/daytime running lights: pull
backhousing cover 2.
#
Turn thesocketcounter-clockwise and pull it
out.
#
Remove thebulb from thesocket.
#
Insert thenew bulb intothe socketsuchthat
thebase of thebulb restsfullyagainstthe
base of thesocket.
#
Insert thesocketand turnitclockwise.
#
Attach housing cover 2.
#
Turn signal indicator:
#
Turn socket 3 counter-clockwise and
remove it.
#
Gently turnthe bulb counter-clockwise and
take it out of thesocket.
#
Insert thenew bulb intothe socketand turnit
clockwise.
#
Insertsocket 3 and turnitclockwise.
Additional turnsignal light
Requirements:
R
Additional turnsignal light (all-wheel
drivevehicles): bulb typeP21W
#
Switching offthe lighting system.
#
Unscrew screws1 and remove lens 2.
#
Gently turnthe bulb counter-clockwise and
take it out of thesocket.
#
Insert thenew bulb intothe socketand turnit
clockwise.
#
Place lens2 in position and tightenthe
screws1.
Replacing rear light bulbs(Cargo Vanand
Passenger Van)
Overviewofrear bulbtypes (Cargo Vanand
Passenger Van)
Youcan changethe following bulbs.
Vehicles withstandardtail lamps
1
Brakelights/tail lamps/perimeterlights:
P21W
2
Reversing lights: P21W
3
License plate lamp: W5W
4
Rear foglights: P21W
Youcan changethe following bulbs.
86
Light and vision

Mercedes-Benz Sprinter 2019 Specifications

General

Brand	Mercedes-Benz
Model	Sprinter 2019
Category	Automobile
Language	English