#
To install achild restraint system: when
installing achild restraint system, always
observe themanufacturer's installation and
operatinginstructions as well as theinforma‐
tion in this Operator's Manual.
#
Pull theseat belt smoothly from theseat belt
outlet.
#
Engage theseat belt tongueinthe seat belt
buckle.
#
To activatethe special seatbelt retractor:
pull theseat belt out fully and letthe inertia
reel retract it again.
Whenthe special seat belt retractor is activa‐
ted, youshouldhear aratcheting sound.
#
Push thechild restraint system down until the
seat belt sits tightly.
#
To deactivatethe special seatbeltretrac‐
tor: press therelease button of theseat belt
buckle.
#
Hold theseat belt tongueand guidebackto
theseat belt outlet.
Installing theLATCH-type (ISOFIX) child
restraint system on therear seat
NotesonLATCH-type (ISOFIX) child seat
securing systems
&
WARNING Risk of injury or deathifthe
permissible gross mass of thechild and
child restraint system is exceeded
ForLATCH-type (ISOFIX)child restraint sys‐
tems in whichthe child is secured using the
integratedseat belt in thechild restraint sys‐
tem, thepermissible gross mass of thechild
and child restraint system is 73 lb (33 kg).
If thechild and thechild restraint system
together weigh morethan 73 lb (33 kg), the
LATCH-type (ISOFIX)child restraint system
withintegrated seat belt does notoffer suffi‐
cient protection.Anexcessiveload maybe
placed on theLATCH-type (ISOFIX)child seat
attachments and thechild maynot be
restrained in theevent of an accident, for
example.
#
If thechild and thechild restraint sys‐
temtogether weigh morethan 73 lb
(33 kg), use onlyaLATCH-type (ISOFIX)
child restraint system that secures the
child withthe vehicle seat belt.
#
Also securethe child restraint system
withthe TopTether belt, if available.
Alwayscomplywiththe information about the
mass of thechild restraint system:
R
In themanufacturer's installation and operat‐
ing instructions forthe child restraint system
used
R
On alabel on thechild restraint system, if
available
Checkregularly that thepermissible gross mass
of thechild plus thechild restraint system is not
exceeded.
When installing achild restraint system, be sure
to observe themanufacturer's installation and
operatinginstructions and thecorrect use of the
child restraint system as well as consider the
suitability of theseats.
ISOFIX is astandardized securing system forspe‐
cial restraint systems. LATCH-type (ISOFIX)child
restraint systems areapprovedinaccordance
withUN-R44.
Onlychild restraint systems that have been
approvedinaccordance withUN-R44may be
attached to LATCH-type (ISOFIX)mounting brack‐
ets.
Symbol forinstalling aLATCH-type (ISOFIX)
child restraint system
Installing LATCH-type (ISOFIX) child seat
securing systems
&
WARNING Risk of injury or deathifthe
permissible gross mass of thechild and
child restraint system is exceeded
ForLATCH-type (ISOFIX)child restraint sys‐
tems in whichthe child is secured using the
integratedseat belt in thechild restraint sys‐
Occupant safety
37
To Next Page
Loading...
Need help?
General
