#
To unlock: pull locking pin 2 upwards man‐
ually or use thecentrallockingbutton to
unlock thesliding door (/ page45).
#
Press button 1 or pull outside handle 3.
The sliding door opens or closes.
#
Press button 1 again or pull outside handle
3.
The sliding door stops moving.
Unlocking theelectric sliding door manually
If therehas been amalfunction or if thebattery
has been disconnected, youcan use release
catch 2 to disconnect thesliding door from the
electric motor. Then, youcan open or close the
door manually.
#
Vehicles with complete sliding door trim:
remove thecover from release catch 2.
Service operationisaccessible.
#
To disconnect the sliding doorfromthe
electric motor: turnrelease catch 2 180°
clockwise.
The "MAN" position is set.
#
To unlock: pull locking pin 3 upwards man‐
ually or use thecentrallockingbutton to
unlock thesliding door (/ page45).
#
Press button 1.
#
Open or close thesliding door withthe out‐
side/inside door handle.
#
To connect thesliding door to theelectric
motor: turnrelease catch 2 180° counter-
clockwise.
The "AUTO" position is set.
#
Adjustthe sliding door (/ page50).
If it is notpossible to rectifythe malfunction:
#
Visit aqualified specialistworkshop.
Resetting theelectric sliding door
Slidingdoor buttons on thecenter console
Sliding door button on thedoor sill (B-pillar)
Youmustresetthe sliding door if therehas been
amalfunction or avoltagesupplyinterruption.
50
Opening and closing
To Next Page
Loading...
Need help?
General
