Vehicles withpartial LED tail lamps
1
Reversing lights: P21W
2
License plate lamp: W5W
3
Rear foglights: P21W
Tail lamps (Cargo Vanand Passenger Van)
Requirements:
R
Brakelights/tail lamps/perimeterlights:
light bulb typeP21W
R
Reversing lights: bulb type P21W
R
Rear foglights: bulb type P21W
1
Brakelights/taillamps/perimeter lights
2
Reversing light
3
Rear foglight
#
Switchoff thelighting system.
#
Open therear door.
#
To remove: loosenscrews 1 and pull out
thetail lamps in thedirection of thearrow.
#
Remove theconnector from bulb mount 3.
#
Loosen screws 2 and remove bulb mount
3 from thetail lamp.
#
Gently turnthe bulb counter-clockwise and
take it out of thesocket.
#
Insert thenew bulb intothe socketand turnit
clockwise.
#
To install: setbulb mount 3 on thetail lamp
and screw in screws 2.
#
Press theconnector intobulb mount 3.
#
Insertthe tail lampand screw in screws 1.
License platelamp
Requirements:
R
License platelamp: light bulb type W5W
Light and vision
87
To Next Page
Loading...
Need help?
General
