The cameraalso detects trafficsigns with a
restriction indicated by an additional sign (e.g. in
wetconditions).
Warning when themaximum permissible
speed is exceeded
The system can warn youifyou unintentionally
exceed themaximum permissible speed. To do
this, youcan specify in themultimedia system by
howmuchthe maximum permissible speed can
be exceeded beforeawarning is issued. Youcan
specify whether thewarning is to be justavisual
warning or an audible one as well.
Displayinthe Instrument Display
Instrument Display(color display)
1
Permissible speed
2
Permissible speed when thereisarestriction
3
Additional sign witharestriction
%
Onlyone of trafficsigns 1 or 2 is dis‐
playedatany one time in theInstrument Dis‐
play, if necessarywithadditional sign 3.If
twovalid trafficsigns aredetected at the
same time, aplus sign appears next to the
trafficsigninthe Instrument Displayasan
indication that both trafficsigns aredis‐
playedinthe navigation system.
SinceTraffic Sign Assistalso uses thedata
stored in thenavigation system, it can also
updatethe displaywithout detecting trafficsigns:
R
whenthe vehicle changes roads, e.g.freeway
entry or exit road
R
when avillageorcityboundarystoredinthe
digital map is passed
TrafficSign Assist is notavailable in all countries.
If it is unavailable, display 1 is shown in the
speedometer.
System limitations
The system maybeimpaired or maynot function
in thefollowing situations:
R
The system is affected by poor visibility,e.g.
due to insufficient illumination of theroad,
highlyvariable shade conditions, or due to
rain, snow, fogorheavy spray
R
The system is impaired by glare, e.g.from
oncomingtraffic, direct sunlightorreflections
R
The system is affected by dirtonthe wind‐
shield in theareaofthe multifunction cam‐
era, or because thecamera is fogged up,
damaged or covered
R
The traffic signsare hardtodetect, e.g.due
to dirt, because they arecovered, due to
snoworinsufficient lighting
R
The information in thenavigation system's
digital map is incorrect or out-of-date
R
The system is affected by ambiguous signs,
e.g.trafficsigns on construction sites or in
adjacent lanes
Setting TrafficSign Assist
Multimediasystem:
4
©
5
Settings
5
Assistance
5
Traffic Sign Assist
Displaying detected trafficsigns in themedia
display
#
Select Display in HU.
#
Activateordeactivate thefunction.
Setting thetypeofwarning
#
Select Visual &Audible, Visual or None.
Setting thewarningthreshold
This value determines at whichpoint thewarning
is given onceaspeed limit is exceeded.
154
Driving and parking
To Next Page
Loading...
Need help?
General
