Operating thecombination light switch
1
High beam
2
Right indicator
3
High-beam flasher
4
Leftturnsignal
#
To indicate: push thecombination switchin
required direction 2 or 4 until it engages.
In thecase of larger steering movements, the
combinationswitchautomatically switches
back.
#
To indicatebriefly: tapthe combination
switchbriefly in required direction 2 or 4.
The corresponding turnsignal light flashes
threetimes.
#
To switchonthe highbeam: switch on the
lowbeam (/ page80).
#
Press thecombination switchforwards 1.
The K indicator lamponthe instrument
clusterwilllightup. The combination switch
willreturntoits startingposition.
%
The high beam switches to position Ã
onlyindarkness and when theengine is run‐
ning.
#
To switchoff thehigh beam: push combina‐
tion switch 1 forwards or briefly pull it in the
direction of arrow 3 (the high-beam flasher
switches thehigh beam off).
The K indicator lamponthe instrument
clusterwillgoout. The combination switch
willreturntoits startingposition.
%
Vehicles with Highbeam Assist: when
Highbeam Assistisactive, it controls the
activationand deactivationofthe high beam
(/ page82).
#
To activatethe high-beam flasher: switch
on thepowersupply or ignition.
#
Briefly pull thecombination switchinthe
direction of arrow 3.
Switching hazardwarninglights on or off
#
To switchonand off: press button 1.
If youoperateaturnsignal indicator while the
hazardwarning lightsare switched on, onlythe
turnsignalindicatoronthe relevant sideofthe
vehicle lights up.
If thehazardwarning lightshave automatically
switched on, press thehazardwarning lamp
switch 1 to switchthem off.
%
The hazardwarning lightsworkevenwhen
theignition is switched off.
Cornering light function
Cornering light improvesthe illuminationofthe
road overawideangle in theturning direction,
enabling better visibility in tight bends, forexam‐
ple.
Lightand vision
81
To Next Page
Loading...
Need help?
General
