Siemens SINAMICS SIMOTICS S200 PROFINET User Manual

5.2.7 Mounting the feather key
Requir
ement
WARNING
Injuries due to feather key 󹪞ung out
When a motor using a k
ey is running, the feather key on the shaft can be thrown out by
centrifugal force. This can result in personal injury or material damage.
• Before operating the motor, the feather key on the shaft must be 󹪝rmly secured to prevent
from being thrown out by the centrifugal force.
NOTICE
Damage to motor bearing due to improper operation
Nev
er mount the feather key by hammering into the key slot; otherwise, there is a risk of
bearing damage.
• Pay attention to the installation direction of the feather key.
• Mount the key without striking the key slot or the shaft extension.
Mounting
5.2Motor
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB 119

Siemens SINAMICS SIMOTICS S200 PROFINET Specifications

General

Brand	Siemens
Model	SINAMICS SIMOTICS S200 PROFINET
Category	Servo Drives
Language	English