Siemens SINAMICS SIMOTICS S200 PROFINET User Manual

1.2.3 What's new?
Description
Chang
es with respect to Edition 07/2023
• Updated the converter 󹪝rmware to V6.3
• Updated the rating plate example for 1FL2 motors, shaft heights 20 and 30
Rating plate (Page50)
• Updated the serial number explanation for 1FL2 motors
Serial number explanation (Page53)
• Added the description of removing the IT screw for the functional grounding
Removing the IT screw for the functional grounding (Page84)
• Updated the wiring diagram for digital inputs
Wiring of digital inputs (Page154)
• Added the description of drive data encryption
Security settings (Page174)
• Optimized the description of Basic Positioner (EPOS) function
Basic positioner (EPOS) (Page368)
• Updated the description of LED states
Status display via LEDs (Page422)
• Updated the description of the converter replacement
Replacing the converter (Page590)
• Added the instructions on disassembling the hybrid connector of 1FL2 motors, shaft heights
20, 30, and 40
Disassembling the hybrid plug for 1FL2 motors, shaft heights 20, 30, and 40 (Page891)
1.2.4 Standard scope
Description
This documentation describes the functionality of the standard scope. This scope may di󹪜er
from the scope of the functionality of the system that is actually supplied. Please refer to the
ordering documentation only for the functionality of the supplied drive system.
Further functions may be executable in the system, which are not explained in this
documentation. However, there is no entitlement to these functions in the case of a new
delivery or service.
This documentation does not contain all detailed information on all types of the product.
Furthermore, this documentation cannot take into consideration every conceivable type of
installation, operation and service/maintenance.
The machine manufacturer must document any additions or modi󹪝cations they make to the
product themselves.
Introduction
1.2About this manual
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB 17

Siemens SINAMICS SIMOTICS S200 PROFINET Specifications

General

Brand	Siemens
Model	SINAMICS SIMOTICS S200 PROFINET
Category	Servo Drives
Language	English