Siemens SINAMICS SIMOTICS S200 PROFINET User Manual

The search can be limited by searching for keywords and using the 󹪝lter function according t
o
date.
The diagnostic bu󹪜er is kept when restoring factory settings via menu "Backup and restore".
7.4.4.3 Safety Integrated (for S200 PN only)
Overview
Function view "Safety Integrated" provides information about the Safety Integrated Functions
that have been enabled.
Description of function
Figure7-11 Monitoring Safety Integrated Functions
The following content is displayed:
• "St
atus of Safety Integrated Functions"
Displays the status of STO
• "Status"
Displays "Active" if STO is active
• "Versions"
Displays the safety-relevant software versions of the corresponding components
Commissioning (web server)
7.4Functions and menus
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
192 Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB

Siemens SINAMICS SIMOTICS S200 PROFINET Specifications

General

Brand	Siemens
Model	SINAMICS SIMOTICS S200 PROFINET
Category	Servo Drives
Language	English