Siemens SINAMICS SIMOTICS S200 PROFINET User Manual

Certi󹪝cates of License (eCoL)
Under "Cer
ti󹪝cates of License (eCoL)", you load purchased licenses directly from an SD card
into the 󹪝le system of the operating unit.
7.4.7.5 Firmware update
Overview
You can perform a 󹪝rmware update in the web server:
• For an upgrade, the converter and web server settings are retained.
• For a downgrade, the converter and web server are reset to factory settings. All user-de󹪝ned
settings are reset to the factory settings, including:
– Parameterization of the converter
– Activation and settings of User Management & Access Control
– "IP con󹪝guration" and "Device name" communication settings of the service interface
(X127)
– Self-generated certi󹪝cates
– User-de󹪝ned parameter lists in the web server
Requirement
• The operating unit is connected to the converter's web server.
• An empty SD card is inserted into the card slot of the converter before starting the 󹪝rmware
update for storing the user data temporarily.
Note: The SD card must be inserted when the converter is switched o󹪜.
• The converter is in servo-o󹪜 state.
Description of function
This function view "Firmware update" displays the current version of the 󹪝rmware and of the web
server.
To copy a di󹪜erent 󹪝rmware version to the converter, load the ZIP 󹪝le containing the 󹪝rmware
from the 󹪝le system of the operating panel.
7.4.7.6 About web server
Overview
"About web server" contains information about the web server and links to additional
information.
Commissioning (web server)
7.4Functions and menus
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB 215

Siemens SINAMICS SIMOTICS S200 PROFINET Specifications

General

Brand	Siemens
Model	SINAMICS SIMOTICS S200 PROFINET
Category	Servo Drives
Language	English