Eurasian Conformity
The conver
ter complies with the requirements of the Russia/Belarus/Kazakhstan customs
union (EAC).
EMC requirements for South Korea
The converter with the KC marking on the rating plate satises the EMC requirements for
South Korea.
China RoHS
The converter complies with the requirements of China RoHS. You can nd additional
information on the Internet:
China RoHS (https://support.industry.siemens.com/cs/ww/en/ps/29596/cert)
Immunity to volt
age drop of semiconductor process equipment
The converter fullls the requirements of the standard SEMI F47-0706.
Quality systems
Siemens AG employs a quality management system that meets the requirements of ISO 9001
and ISO14001.
Certicates for download
You can nd all relevant certicates for download on the Internet:
Certicates (https://support.industry.siemens.com/cs/ww/en/ps/29596/cert)
3.5.2 Directiv
es, standards and certicates for the motor
The following directives and standards are relevant for the motors:
European Low Voltage Directive
The motors fulll the requirements stipulated in the Low-Voltage Directive 2014/35/EU, if
they are covered by the application area of this directive.
European Machinery Directive
The motors fulll the requirements stipulated in the Machinery Directive 2006/42/EC, if they
are covered by the application area of this directive.
However, the use of the motors in a typical machine application has been fully assessed for
compliance with the main regulations in this directive concerning health and safety.
European Directive on rotating electrical machines
The motors comply with the requirements of EN 60034 directive on rotating electrical
machines.
Description
3.5Directives and standards
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
74 Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
To Next Page
Loading...
Need help?
General
