Siemens SINAMICS SIMOTICS S200 PROFINET User Manual

1.2 About this manual
1.2.1 Content
Descr
iption
This manual provides a summary of all of the information required to safely and reliably operate
the converter-motor combination.
The manual enables the target groups being addressed to mount, connect, and commission
the converter and motor safely and correctly.
To illustrate possible application areas for our products, typical use cases are listed in this product
documentation and in the online help. These are purely exemplary and do not constitute a
statement on the suitability of the respective product for applications in speci󹪝c individual cases.
Unless explicitly contractually agreed, Siemens assumes no liability for such suitability.
Suitability for a particular application in speci󹪝c individual cases must be assessed by the user,
taking into account all technical, legal, and other requirements on a case-by-case basis. Always
observe the descriptions of the technical properties and the relevant constraints of the
respective product contained in the product documentation.
1.2.2 Target group
Description
This manual is intended for persons who perform di󹪜erent tasks in the drive environment. The
intended target groups include, but are not limited to the following:
• Planning engineers
• Project engineers
• Machine manufacturers
• Commissioning engineers
• Electricians
• Installation personnel
• Service and maintenance personnel
Introduction
1.2About this manual
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
16 Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB

Siemens SINAMICS SIMOTICS S200 PROFINET Specifications

General

Brand	Siemens
Model	SINAMICS SIMOTICS S200 PROFINET
Category	Servo Drives
Language	English