Siemens SINAMICS SIMOTICS S200 PROFINET User Manual

7.4.6.2 Save drive data to backup 󹪝le
Overview
Run the "Save drive data to backup 󹪝le" function in the following situations:
• After commissioning
• Before drive data is reset using function "Restore factory settings" in the web server
You can 󹪝nd more information in Chapter "Restore factory settings (Page207)".
• Before drive data is completely reset
You can 󹪝nd more information in Chapter "Reset of all user-de󹪝ned settings to the factory
setting via an SD card (Page587)".
• Before a 󹪝rmware upgrade/downgrade
Requirement
None
Procedure
1. Call the "Backup and restore" menu.
2. Click on the "Save drive data to backup 󹪝le" button.
Optional: Assign a name for the backup 󹪝le.
The drive data is backed up. The backup 󹪝le is saved in the download folder of your operating
unit.
Result
• The drive data are not encrypted in the backup 󹪝le if you deactivated function "Drive data
encryption" in the Security Wizard.
• The drive data are encrypted in the backup 󹪝le if function "Drive data encryption" is activated
in the Security Wizard and you have con󹪝gured a drive password.
Recommendation:
– Store the password in a secure location, for example, in a password manager. Ensure that
you can access the password if needed.
7.4.6.3 Scope of the backup
Overview
The "Back up parameters" function backs up all converter settings to one 󹪝le.
Commissioning (web server)
7.4Functions and menus
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB 201

Siemens SINAMICS SIMOTICS S200 PROFINET Specifications

General

Brand	Siemens
Model	SINAMICS SIMOTICS S200 PROFINET
Category	Servo Drives
Language	English