COLD START INJECTOR TIME SWITCH
EGOHP–01
COLD START INJECTOR TIME SWITCH
INSPECTION
EGOHQ–01
INSPECT RESISTANCE OF COLD START INJECTOR TIME
SWITCH
Using an ohmmeter, measure the resistance between each
terminal.
Resistance:
STA–STJ
25–45 below 15°C (59°F)
65–85 above 30°C (86°F)
STA–Ground
25–85
If the resistance is not as specified, replace the switch.
–ENGINE TROUBLESHOOTING SFI SYSTEM
EG–223
To Next Page
Loading...
Need help?
General
