[12].CHECK FOR MOMENTARY INTERRUPTION
By performing the check for momentary interruption, the place where momentary interruptions or momen-
tary shorts are occurring due to poor contacts can be isolated.
[13] ADJUSTMENT, REPAIR
After the cause of the problem is located, perform adjustment or repairs by following the inspection and
replacement procedures in this manual.
[14] CONFIRMATION TEST
After completing adjustment or repairs, confirm not only that the malfunction is eliminated, but also conduct
a test drive, etc., to make sure the entire Engine Control System is operating normally.
EG–314
–ENGINE TROUBLESHOOTING HOW TO PROCEED WITH TROUBLESHOOTING
To Next Page
Loading...
Need help?
General
