3. DISCONNECT HOSES FROM OIL COOLER
Disconnect the following hoses:
(1) Outlet hose (to reservoir tank)
(2) Inlet hose (from hydraulic motor)
4. REMOVE UNDER COVER
Remove the five bolts and under cover.
5. REMOVE RH FOG LAMP ASSEMBLY
(a) Remove the two bolts.
(b) Disconnect the connector and remove the fog lamp
assembly.
6. REMOVE OIL COOLER
(a) Pull aside the shroud to expose the bolt in the stay. Remove
the bolt.
(b) Remove the two nuts and remove the oil cooler.
EG–278
–ENGINE TROUBLESHOOTING COOLING SYSTEM
To Next Page
Loading...
Need help?
General
