OIL PUMP
OIL PUMP REMOVAL
EG098–02
HINT: When repairing the oil pump, the oil pan and strainer
should be removed and cleaned.
1. DISCONNECT CABLE FROM NEGATIVE TERMINAL OF
BATTERY
CAUTION (w / Airbag): Work must be started after
approx. 30 seconds or longer from the time the ignition
switch is turned to the ”LOCK” position and the negative
(–) terminal cable is disconnected from the battery.
2. REMOVE HOOD
3. DRAIN ENGINE COOLANT
4. DRAIN ENGINE OIL
EG–294
–ENGINE TROUBLESHOOTING LUBRICATION SYSTEM
To Next Page
Loading...
Need help?
General
