FUEL PRESSURE VSV
EGOHT–01
FUEL PRESSURE VSV INSPECTION
EGOHU–01
1. CHECK VSV FOR OPEN CIRCUIT
Using an ohmmeter, check that there is continuity between
the terminals.
Resistance (Cold):
33–39
If there is no continuity, replace the VSV.
2. CHECK VSV FOR GROUND
Using an ohmmeter, check that there is no continuity be-
tween each terminal and the body.
If there is continuity, replace the VSV.
–ENGINE TROUBLESHOOTING SFI SYSTEM
EG–225
To Next Page
Loading...
Need help?
General
