HINT: Different oil seals are used for the intake and exhaust.
(b) Install the following parts:
(1) Valve
(2) Spring seat
(3) Valve spring
(4) Spring retainer
(c) Using SST, compress the valve spring and place the two
keepers around the valve stem.
SST 09202–70010
(d) Using a plastic–faced hammer, lightly tap the valve stem tip
to assure proper fit.
3. INSTALL VALVE LIFTERS AND SHIMS
Check the valve lifter rotates smoothly by hand.
EG–72
–ENGINE TROUBLESHOOTING ENGINE MECHANICAL
To Next Page
Loading...
Need help?
General
