FIELD OPERATION
4-12
ERROR REPORTS
Error ref.
Description
11 Failure or interruption of the solenoid to raise the header
12 Failure or interruption of the solenoid to lower the header
13 Short circuit in the stubble height and compensation control wiring loom
14 Interruption of the stubble height and compensation control wiring loom
15 Failure or interruption of header height control switch
16 No power supply to the control switches
17 Battery voltage higher than 18 V
18 Failure of selector switch 17
21 Failure of wiring loom to the header height sensor
22 Incorrect stubble height signal
23 Failure or interruption of the header cylinder pressure sensor
24 Incorrect pressure sensor signal
25 Failure of header height control switch
- section ‘‘Slow’’ or ‘‘Fast’’: OK
- section ‘‘Lower’’ or ‘‘Raise’’: NOT OK
31 No signal or incorrect signal from left-hand autofloat sensor [accessory]
32 No signal or incorrect signal from right-hand autofloat sensor [accessory]
33 Failure of automatic header height control switch 20 wiring loom
35 Battery voltage lower than 12 V
36 Failure of the hydraulic header height control valve (electrical control: OK)
To Next Page
Loading...
Need help?
General
