SECTION 4
4-19
S Models with lateral flotation -- Figure 19
For all crops other than maize:
1. Adjust special nut K on both sides until dis-
tance X measures 90 mm.
2. If necessary, adjust spring L to a length of 112
mm.
Adjust with nut M.
For maize crops:
1. Adjust special nut K on both sides until dis-
tance X measures 113 mm.
2. If necessary, adjust spring L to a length of 89
mm.
Adjust with nut M.
STRAW ELEVATOR BOTTOM PLATE -- Figure 20
The bottom plate middle section can be replaced by a
perforated access door [accessory] which is recom-
mended when threshing beans, peas or maize in or-
der to obtain a cleaner grain sample.
When the perforated access door is installed, it is pos-
sible to operate with or without the smooth bottom
plate.
To install or remove this smooth plate, proceed as fol-
lows:
1. Remove bolts D.
2. Loosen bolts G.
3. Unscrew lever E and open the access door F.
4. Install or remove the smooth bottom plate on top of
the perforated access door F.
55000
19
20
30241
To Next Page
Loading...
Need help?
General
