ADJUSTMENTS AND MAINTENANCE
5-64
MAINTENANCE SCHEDULE
Service to be performed before
the first start-off
Section Page
1. Check wheel nut torques Specification 9-2
2. Check all chain and belt tensions Adjustments and Maintenance 5-1
3. Check all tyre pressures Specification 9-3
4. Check brake fluid level Lubrication 3-17
5. Check engine oil level Lubrication 3-14
6. Check coolant level in radiator Adjustments and Maintenance 5-44
7. Check hydraulic oil level Lubrication 3-19
8. Check hydrostatic oil level Lubrication 3-21
9. Check fuel level Adjustments and Maintenance 5-41
10. Grease all nipples Lubrication 3-1
Run-in period Service to be performed
Section Page
First week: daily Check wheel nut torques
Specification
9-2
After first 50 hours
Change drum speed reducer oil Lubrication 3-23
After first 100 hours
Change hydrostatic oil and oil fil-
ter
Lubrication 3-21
Change hydraulic oil and oil filters Lubrication 3-19
Change traction gearbox oil Lubrication 3-12
Change final drive gearbox oil Lubrication 3-13
After first 200 hours Change traction gearbox oil Lubrication 3-12
Change final drive gearbox oil Lubrication 3-13
To Next Page
Loading...
Need help?
General
