FIELD OPERATION
4-80
The display will show -- Figure 116
‘‘BE SURE ENGINE SPEED IS MAXI-
MUM AND PRESS ENTER’’
Run the engine at maximum speed with-
out any mechanism being engaged and
press
to confirm this speed.
The theoretical engine speed given be-
fore is now matched to the realistic one.
The lights on the rpm monitor will blink for
5 seconds.
The real engine high idle speed is now in-
troduced as reference rpm.
S When selecting ‘‘CAL ENGINE RPM:
NO’’, the calibration procedure will auto-
matically continue with step j.
j) Figure 117 -- Appearing:
‘‘CLEANING SHOE
SL: YES
FS: NO’’
S In case the machine is equipped with a
fixed cleaning shoe, select:
‘‘CLEANING SHOE
SL: NO
FS: YES’’
by pressing
or , and
to validate.
S In case the machine is equipped with a
self-levelling cleaning shoe, select:
‘‘CLEANING SHOE
SL:YES
FS: NO’’
by pressing
or , and
to validate.
On units equipped with a flex header con-
trol printed circuit, continue with step l.
48155
48191
116
117
To Next Page
Loading...
Need help?
General
