SECTION 2
2-33
SELF-DIAGNOSTICS -- Figures 42 and 43
The blinking sequence of the LED’s on the remote
control console identifies a message/error report. Er-
ror reports can show up after switching on contact or
after a gearshift. It is possible to clear the errors by
pressing button P. If not, contact your local dealer. To
reset the system, press the buttons of 2nd and 3rd
gear simultaneously.
Message/Error report
1. Check all keyboard LED’ s after contact or reset
(control lights will show up for 1 second).
2. Message: Searching for 3rd gear.
3. Error: Gear motor did not reach the selected gear.
4. Error: Pressure release valve problem.
5. Error: Parking brake valve problem.
6. Error: Gear motor problem.
7. Error: More than 1 microswitch activated.
8. Press “P” to clear all errors.
9. Press “2” and “3” to reset the system.
4
3
N
2
4
3
N
3
N
2
P
4
3
N
P
4
N
2
P P P
4
1
3
2
2Hz
1 1 1 1
2
12345
4Hz
4Hz 4Hz
4Hz
4Hz
4
3
N
2
4
3
N
3
N
2
P
4
3
N
P P P
4
1
2
1 1 1
2
6789
4Hz
4Hz
4Hz
52447
52448
42
43
To Next Page
Loading...
Need help?
General
