LUBRICATION
3-14
ENGINE -- Figures 61 to 64
NOTE:
Fuel sulphur content
Use fuel with a sulphur content below 0.5%.
If not available, change oil and filter(s) as de-
tailed below:
Fuel sulphur content Oil filter change
0.5% -- 1 % 100 hours
1% -- 1.3 % 50 hours
Use of fuel with sulphur content above 1.3 % is
not recommended.
Oil level
Check the oil level daily on dipstick J.
If necessary, add oil through filler hole K until the oil
reaches the maximum mark on dipstick J.
IMPORTANT:
At no time should the oil level be allowed to fall
below the minimum level.
Recommended oil and filter change intervals
S After the first 50 operating hours
S Every 200 operating hours when using API CD/
SF oil (*)or
S Every 300 operating hours w hen using API
CF-4/SG oil (*)
(*) See paragraph headed ‘‘Oil specification’’ below.
Drain the oil through hose L while the engine is mod-
erately warm and refill through filler hole K.
Refer to paragraph headed ‘‘Filter change’’ below.
Check the oil level on dipstick J.
42954
61
42808
62
63
TX62-63-64
PLUS
-65
PLUS
-66-67
TX68-68
PLUS
42809
TX62-63-64
PLUS
-65
PLUS
-66-67
To Next Page
Loading...
Need help?
General
