OPERATION
2-30
DRIVING THE COMBINE
CAUTION:
The combine rear end swings out when
changing direction. Take care when tak-
ing turns.
1. Ensure that the ground speed control lever is in
the neutral position.
2. Move the gearshift lever into the desired gear.
S For field operation, use first, second or third
gear, depending upon the circumstances.
S For manoeuvring in confined spaces, use first
gear.
S For road transport, use third or fourth gear.
3. Release the handbrake.
CAUTION:
Keep brake pedals depressed while re-
leasing the handbrake.
Ensure not to touch the hydrostatic lever
when releasing the handbrake.
4. Move the ground speed control lever slightly for-
ward from the neutral position to advance, or from
the neutral position rearwards to reverse.
NOTE:
When reversing the combine, an audible alarm
will automatically warn bystanders.
5. Familiarize yourself with the different steering
and driving characteristics.
IMPORTANT:
In case of hydrostatic control failure, the emer-
gency rocker switch B can be used. To move
forward pull the switch up. To reverse push the
switch down. Refer to item 23. However, use
this switch only if really necessary to drive the
machine off the road.
42759
38
To Next Page
Loading...
Need help?
General
