FIELD OPERATION
4-74
a) Once arrived at a selection line, as de-
scribed, press
to go from one
item to the next one. Press as many
times as needed until the appropriate
item is reached.
b) When no further items need to be cali-
brated, it is not necessary to proceed to
the end of a selection line, which is when
‘‘CAL/SET COMPLETE’’ is displayed.
c) After the calibration of a specific item is
validated by pressing
, the cali-
bration mode can be left by pres-
sing
.
Line 1 -- TYPE
1. Select line 1 (‘‘TYPE’’) in the calibration mode by
pressing
or , and to validate
the choice.
a) Figure 105 -- Appearing:
Select the correct language by pressing
or , and to validate the
choice.
52272
105
To Next Page
Loading...
Need help?
General
