FIELD OPERATION
4-66
Error table
Code Error description Importance
000 (NO ERROR)
001 ‘‘LCD NETWORK ERROR”
Optical fibre failure.
HIGH
002 ‘‘OTHER N ETWORK ERROR”
Optical fibre failure.
HIGH
003 ‘‘NETWORK OVERLOAD”
Too much traffic on the local network.
HIGH
004 ‘‘SOFTWARE ERROR”
Software fault or failure has been detected.
HIGH
100 ‘‘TOTAL ENGINE HOURS =”
Different total hours are detected in the nodes on the network.
REMARK:
This error is displayed in a special error page format.
Refer to paragraph 6.2.
MEDIUM
113 ‘‘CHOPPER LEFT SENS. 0”
Chopper rpm sensor disconnected.
MEDIUM
114 ‘‘CHOPPER LEFT SENS. --”
Chopper rpm sensor shorted to ground.
MEDIUM
115 ‘‘CHOPPER LEFT SENS. +”
Chopper rpm sensor shorted to +12 Volt.
MEDIUM
116 ‘‘CHOPPER ACTION FAULT”
Malfunction of the chopper actuator, motor or clutch.
MEDIUM
120 ‘‘GROUND SPEED SENS. 0”
Ground speed sensor disconnected.
MEDIUM
121 ‘‘GROUND SPEED SENS. --”
Ground speed sensor shorted to ground.
MEDIUM
122 ‘‘GROUND SPEED SENS. +”
Ground speed sensor shorted to +12 Volt.
MEDIUM
125 ”ENGINE RPM SENSOR 0”
Engine rpm sensor disconnected.
MEDIUM
126 ”ENGINE RPM SENSOR --”
Engine rpm sensor shorted to ground.
MEDIUM
To Next Page
Loading...
Need help?
General
