Canon IR1600 User Manual

CHAPTER 7 FIXING SYSTEM
COPYRIGHT © 2002 CANON INC. 2000 CANON iR1600/iR2000 REV.1 JAN. 2002
7-6
2.2.2 Control According to the Type of Paper
The machine uses the following modes to suit the selected type of paper:
T07-202-01
2.2.3 Control at Time of Down Sequence
In continuous printing, the temperature of the area not in contact with paper as detected
by the sub thermistor can be abnormally high. To prevent overheating, the machine increases
the distance between sheets.
• Down sequence is started when the reading of the sub thermistor is 210°C.
• Down sequence is ended when continuous printing ends.
Mode
Plain paper
mode (default)
Heavy paper
mode
Control temperature
during printing
173ºC
195ºC
Control temperature
in standby
140ºC
140ºC
Remarks
Used when printing on
plain paper.
Used when printing on pa-
per with a coarse surface or
in a low temperature envi-
ronment.
To ensure good fixing, the
initial rotation period is ex-
tended by 5 sec; for con-
tinuous printing, the dis-
tance between sheets is in-
creased.

Canon IR1600 Specifications

General

Print Technology	Laser
Type	Monochrome
Maximum Print Resolution	600 x 600 dpi
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Standard Paper Capacity	250 sheets
Maximum Paper Size	A4
Functions	Print, Copy, Scan
Print Speed	16 ppm
Copy Speed	16 cpm
Scan Resolution	600 x 600 dpi
Operating System Compatibility	Windows
Interface	USB 2.0