Canon IR1600 - Warning Messages

COPYRIGHT © 2002 CANON INC. 2001 2001 2001 2001 CANON Printer Board-N1/iN-E5 REV.0 JAN. 2002
5-5
CHAPTER 5 TROUBLESHOOTING
2.2 Warning Messages
A warning message may be may be any of the following; take the action given to suit
each message:
Message
MEMORY OVERFLOW
FLASH OVERFLOW
MRT COMPRESSION
DISK ALMOST FULL
DISK FULL
READY JOB LOG
FULL
READY NEAR STORE
LIMIT
Meaning
A memory overflow has oc-
curred.
A memory overflow has oc-
curred in the optional Flash
ROM.
The printer is processing com-
plex data.
The optional hard disk is 70% or
more full.
The optional hard disk is 95%
full, and the printer will go
offline.
The amount of stored job logs
will exceed the maximum limit.
The number of stored print jobs
will exceed the maximum of
9500.
Action
The printer has received more data than
it can hold in the available memory on
the printer board.
If AUTOCONT is ON (CONFIG
MENU), the print job will be put back
online after 10 sec. If AUTOCONT is
OFF, the printer will go offline.
Press the Go key and the print job will
continue printing, although data may be
lost.
Simplify the print job by deleting un-
necessary fonts or macros from the
printer memory, or add additional
memory to the printer.
The printer has received more font and
macro data than it can hold in the avail-
able memory of the Flash ROM. The
printer will go offline. Press the Go but-
ton to put the printer back online.
Format the Flash ROM or delete font
and macro data to create more space.
The printer is using MRT Compression
because the page is too complex.
Wait a moment for the operation to
complete.
Delete any font or macro files that are
no longer needed to increase the amount
available disk space.
The printer will be put back online after
10 sec, if AUTOCONT is ON (CONFIG
MENU).
Delete any fonts or macro files that are
no longer needed to increase the amount
of available disk space.
Delete unnecessary job logs from the
hard disk.
Delete unnecessary print jobs from the
hard disk.