CHAPTER 13 TROUBLESHOOTING
COPYRIGHT
©
2002 CANON INC. 2000 CANON iR1600/iR2000 REV.1 JAN. 2002
13-4
2.1.2 Adjusting the Image Position
Make 10 prints each from the following sources of paper, and check to see that the image
margin and non-image width are as indicated:
■ cassettes
■ manual feed tray
If not, go through the following to adjust the image position:
(The machine is not equipped with separate adjustment mechanisms for its cassette
pickup assembly and manual feed tray pickup assembly; be sure to make the following ad-
justments so that they both will be as indicated.)
1) Adjusting the Leading Edge Margin for the Printer Assembly (if equipped with printer
functions)
This is intended for printing that does not involve reading of an original, while 2 and 3
that follow involve reading an original.
2) Adjusting the Image Position for Copying
1. image leading edge margin adjustment (read start position in main scanning direc-
tion)
2. left/right image margin adjustment (read start position in sub scanning direction)
3. leading edge non-image width (read ratio in sub scanning direction)