Canon IR1600 User Manual

CHAPTER 13 TROUBLESHOOTING
COPYRIGHT © 2002 CANON INC. 2000 CANON iR1600/iR2000 REV.1 JAN. 2002
13-118
6.2 Error Codes
The following are the possible error codes and causes of errors that can occur in the ma-
chine:
6.2.1 Error Codes Used for the Machine
E000
The main thermistor reading does not reach 40ºC 14 sec after the fixing
heater goes ON. (fixing low temperature error)
E001
The main thermistor reading reaches 220ºC or higher. (fixing high tempera-
ture error)
E002
A start-up fault is detected under any of the following conditions of the
main thermistor (start-up detection fault):
after exceeding 40ºC, it fails to reach 60ºC within 10 sec.
after exceeding 60ºC, it fails to reach 80ºC within 10 sec.
after exceeding 80ºC, it fails to reach 100ºC within 10 sec.
after exceeding 100ºC, it fails to reach 120ºC within 10 sec.
after exceeding 120ºC, it fails to reach 140ºC within 10 sec.
after exceeding 140ºC, it fails to reach 160ºC within 10 sec.
after exceeding 160ºC, it fails to reach 180ºC within 10 sec.
after exceeding 180ºC, it fails to reach 195ºC within 10 sec.
E003
After the end of the WAIT period, the main thermistor reading is 100ºC or
lower.
In standby, the sub thermistor reading is 50ºC or lower. (low temperature
error in fixing temperature control)

Canon IR1600 Specifications

General

Print Technology	Laser
Type	Monochrome
Maximum Print Resolution	600 x 600 dpi
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Standard Paper Capacity	250 sheets
Maximum Paper Size	A4
Functions	Print, Copy, Scan
Print Speed	16 ppm
Copy Speed	16 cpm
Scan Resolution	600 x 600 dpi
Operating System Compatibility	Windows
Interface	USB 2.0