Siemens SINAMICS G150 User Manual

2 Parameters
2.2 List of parameters
SINAMICS G130/G150
144 List Manual (LH2), 04/2014, A5E03263479A
The rated temperature is the sum of p0625 and p0628.
Dependency: Refer to: p0628
Note: The parameter is not used for synchronous motors (p0300 = 2xx).
Description: Displays the total stray inductance of the motor.
Induction motor, separately-excited synchronous motor:
Displays the stator leakage inductance of the motor, including the series inductance (p0353) and the motor reactor
(p0233).
Synchronous motor:
Displays the stator quadrature inductance, including the series inductance (p0353) and the motor reactor (p0233).
Description: Displays the stator longitudinal inductance of the synchronous motor including the series inductance (p0353) and the
motor reactor (p0233).
Note: The parameter is not used for separately-excited synchronous motors (p0300 = 5).
Description: Displays the damping inductance of the separately-excited synchronous motor in the rotor direction (d-axis).
Description: Displays the damping inductance of a separately-excited synchronous motor quadrature to the rotor direction (q
axis).
r0377[0...n] Motor leakage inductance total / Mot L_leak total
VECTOR_G Can be changed: - Calculated: - Access level: 4
Data type: FloatingPoint32 Dyn. index: MDS, p0130 Func. diagram: 6640
P-Group: Motor Units group: 15_1 Unit selection: p0349
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- [mH] - [mH] - [mH]
r0378[0...n] Motor stator inductance d axis / Mot L_stator d
VECTOR_G Can be changed: - Calculated: - Access level: 4
Data type: FloatingPoint32 Dyn. index: MDS, p0130 Func. diagram: -
P-Group: Motor Units group: 15_1 Unit selection: p0349
Not for motor type: ASM, REL, FEM Scaling: - Expert list: 1
Min Max Factory setting
- [mH] - [mH] - [mH]
r0380[0...n] Motor damping inductance d axis / Mot L_damp d
VECTOR_G Can be changed: - Calculated: - Access level: 4
Data type: FloatingPoint32 Dyn. index: MDS, p0130 Func. diagram: -
P-Group: Motor Units group: 15_1 Unit selection: p0349
Not for motor type: ASM, PEM, REL Scaling: - Expert list: 1
Min Max Factory setting
- [mH] - [mH] - [mH]
r0381[0...n] Motor damping inductance q axis / Mot L_damp q
VECTOR_G Can be changed: - Calculated: - Access level: 4
Data type: FloatingPoint32 Dyn. index: MDS, p0130 Func. diagram: -
P-Group: Motor Units group: 15_1 Unit selection: p0349
Not for motor type: ASM, PEM, REL Scaling: - Expert list: 1
Min Max Factory setting
- [mH] - [mH] - [mH]

Siemens SINAMICS G150 Specifications

General

Brand	Siemens
Model	SINAMICS G150
Category	Media Converter
Language	English