Siemens SINAMICS G150 User Manual

2 Parameters
2.2 List of parameters
SINAMICS G130/G150
748 List Manual (LH2), 04/2014, A5E03263479A
Description: Sets the signal source for wordwise input signals.
This signal value is available in connector output r8514 for further interconnection.
Dependency: Refer to: r8514
Description: Sets the signal source for wordwise input signals.
This signal value is available in connector output r8515 for further interconnection.
Dependency: Refer to: r8515
Description: Display and binector output for the signal interconnected via binector input p8500[0...7].
Dependency: Refer to: p8500
Description: Display and binector output for the signal interconnected via binector input p8501[0...21].
p8504 CI: Input signal word-serially 2 / Input_sig word 2
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: U, T Calculated: - Access level: 2
Data type: Unsigned32 / Integer32 Dyn. index: - Func. diagram: 2195
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- - 0
p8505 CI: Input signal word-serially 3 / Input_sig word 3
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: U, T Calculated: - Access level: 2
Data type: Unsigned32 / Integer32 Dyn. index: - Func. diagram: 2195
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- - 0
r8510.0...7 BO: Output signal bit-serially 0 / Outp_sig bit 0
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 2
Data type: Unsigned32 Dyn. index: - Func. diagram: 2195
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
00 From BI: p8500[0] ON OFF -
01 From BI: p8500[1] ON OFF -
02 From BI: p8500[2] ON OFF -
03 From BI: p8500[3] ON OFF -
04 From BI: p8500[4] ON OFF -
05 From BI: p8500[5] ON OFF -
06 From BI: p8500[6] ON OFF -
07 From BI: p8500[7] ON OFF -
r8511.0...21 BO: Output signal bit-serially 1 / Outp_sig bit 1
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 2
Data type: Unsigned32 Dyn. index: - Func. diagram: 2195
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -

Siemens SINAMICS G150 Specifications

General

Brand	Siemens
Model	SINAMICS G150
Category	Media Converter
Language	English