2 Parameters
2.2 List of parameters
SINAMICS G130/G150
78 List Manual (LH2), 04/2014, A5E03263479A
Note: A "function module" is a functional expansion of a drive object that can be activated when commissioning.
Description: Displays the activated function module for the particular drive object.
Note: A "function module" is a functional expansion of a drive object that can be activated when commissioning.
Description: Displays the activated function module for the particular drive object.
Note: A "function module" is a functional expansion of a drive object that can be activated when commissioning.
Description: Displays the activated function module for the particular drive object.
20 Bit 20 ON OFF -
21 Bit 21 ON OFF -
22 Bit 22 ON OFF -
23 Bit 23 ON OFF -
24 Bit 24 ON OFF -
25 Bit 25 ON OFF -
26 Bit 26 ON OFF -
27 Bit 27 ON OFF -
28 Bit 28 ON OFF -
29 Bit 29 ON OFF -
30 Bit 30 ON OFF -
31 Bit 31 ON OFF -
r0108 Drive objects function module / DO fct_mod
ENC Can be changed: - Calculated: - Access level: 2
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Closed-loop control Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
12 Linear encoder / Lin_enc Activated Not activated -
18 Free function blocks / FBLOCKS Activated Not activated -
31 PROFINET CBE20 / PROFINET CBE20 Activated Not activated -
r0108 Drive objects function module / DO fct_mod
TB30, TM150, TM31 Can be changed: - Calculated: - Access level: 2
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Closed-loop control Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
18 Free function blocks / FBLOCKS Activated Not activated -
31 PROFINET CBE20 / PROFINET CBE20 Activated Not activated -
r0108 Drive objects function module / DO fct_mod
VECTOR_G Can be changed: - Calculated: - Access level: 2
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Closed-loop control Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
02 Closed-loop speed/torque control / n/M Activated Not activated -
05 Recorder / Recorder Activated Not activated -
08 Extended setpoint channel / Ext setp Activated Not activated -
10 Moment of inertia estimator / J_estimator Activated Not activated -
13 Safety rotary axis / Safety rot Activated Not activated -
14 Extended brake control / Ext brake Activated Not activated -
To Next Page
Loading...
Need help?
General
