Commands Listed in Alphabetical Order
AUXout? (Quer
yOnly)
This query-only command returns the auxiliary output setup and is equivalent to
selecting External Signals. From the Utilities menu, and then viewing the current
settings for
the AUX OUT Configuration.
Group
Miscellaneous
Syntax
AUXout?
Related Commands
AUXout:SOUrce
Examples
AUXOUT? might return :AUXOUT:SOURCE ATRIGGER;EDGE RISING, indicating
that the source at the BNC connector is set to the A trigger and the polarity is set
to the rising edge of the trigger output signal.
AUXout:EDGE
This command sets or queries the direction in which the trigger output signal
will transition when a trigger occurs.
Group
Miscellaneous
Syntax
AUXout:EDGE {RISing|FALling}
AUXout:EDGE?
Arguments
RISing sets the polarity to the rising edge.
FALling sets the polarity to the falling edge.
Example
s
AUXOUT:EDGE RISING sets the polarity to rising edge.
AUXOUT:EDGE? might return :AUXOUT:EDGE F ALLING, indicating that the
polarity is set to falling edge.
AUXout:SOUrce
This command sets or queries the trigger source at the BNC connection. This
comm
and i s equivalent t o sel ecting AUX OUT Configuration from the Utilities
menu and then selecting the desired Configuration setting.
2-100 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
