Commands Listed in Alphabetical Order
ZOOM:MATH1:HO
RIZONTAL:SCALE?
might return
:ZOOM:MATH1:HORIZONTAL:SC ALE 5, indicating that the horizontal scale
factor of the specifiedMath1waveformto5.
ZOOm:MATH<x
>:VERTical:POSition
This command sets or queries the vertical position of the specified math waveform.
Group
Zoom
Syntax
ZOOm:MATH<x>:VERTical:POS ition <NR3>
ZOOm:MATH<x>:VERTical:POS ition?
Arguments
<NR3> is the vertical position, expressed in divisions.
Examples
ZOOM:MATH1:VERTICAL:POSIT ION 5 sets the vertical l position of the specified
Math 1 waveform to 5.
ZOOM:MATH1:VERTICAL:POSIT ION? might return
:ZOOM:MATH1:VERTICAL:POSI TION 340.0000E-3, indicating that the
vertical position of the specified Math 1 waveform is set to 0.34.
ZOOm:MATH<x>:VERTical:SCAle
This command sets or queries the zoom vertical scale of the specified math
waveform.
Group
Zoom
Syntax
ZOOm:MATH<x>:VERTical:SCA le <NR3>
ZOOm:MATH<x>:VERTical:SCA le?
Arguments
<NR3> sets the horizontal scale factor of the specified Math 1 waveform to 10.
Examples
ZOOM:MATH1:VERTICAL:SCALE 5 sets the vertical scale factor of the specified
Math 1 waveform to 5.
ZOOM:MATH1:VERTICAL:SCALE ? might return
:ZOOM:MATH1:VERTICAL:SCAL E 2.0000, indicating that the vertical scale
factor of the specified Math 1 waveform is set to 2.
2-652 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
