Commands Listed in Alphabetical Order
Arguments
<NR3> sets the z
ero level that autoset uses for user masks.
Examples
MASK:AUTOSET:USER:ZERO 1.000 sets the autoset for zero in user masks to
scales in a mask to normalize.
MASK:AUTOSET:USER:ZERO? might return :MASK:AUTOSET:USER:ZERO
0.0000
, indicating that the autoset is using 0.0 volts for zero in user masks.
MASK:AUTOSet:VPOS
This command controls whether the mask autoset algorithm will affect th
e vertical
position (or offset) of the signal while attempting to autoset. The default is ON.
This command, like a ll the mask autoset commands, affects only an a utos
et on a
standard mask, not the general instrument autoset function.
Group
Mask
Syntax
MASK:AUTOSet:VPOS {ON|OFF|<NR1>}
MASK:AUTOSet:VPOS?
Arguments
ON enables the autoset:vpos function.
OFF disables the autoset:vpos function.
<NR1> = 0 disables the autoset:vpos function; any other value enables it.
Examples
MASK:AUTOSET:VPOS ON enables the autoset:vpos function.
MASK:AUTOSET:VPOS? might return :MASK:AUTOSET:VPOS 0.0000,
indicating that the autoset:vpos function is disabled.
MASK:AUTOSet:VSCAle
This command controls whether the mask autoset algorithm will affect the vertical
scale while attempting to autoset.
This command, like all the mask autoset commands, affects only an autoset on a
standard mask, not the general instrument autoset function.
Group
Mask
DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual 2-299
To Next Page
Loading...
Need help?
General
