Commands Listed in Alphabetical Order
Group
Limit Test
Syntax
LIMit:COMpare:REF<x> {NONe|REF<x>}
LIMit:COMpare:REF<x>?
Arguments
NONe argument turns off template testing for the reference waveform specified
by REF<x>.
REF<x> argument selects which reference waveform to use as the template against
which to compare the reference waveform specified by
REF<x>.
Examples
LIMIT:COMPARE:REF2 REF1 specifies REF2 as the template waveform against
which to compare Reference 1.
LIMIT:COMPARE:REF2? might return :LIMIT:COMPARE:REF2 REF4,
indicating that the Referenc e 4 waveform is compared to the template waveform
stored in REF2.
LIMit:EMail
This command sets or queries whether an e -mail is generated when the source
waveform data exceeds the limits specified for the limit test.
NOTE. The command works only if the LT Limit Test option is enabled.
Group
Limit Test
Syntax
LIMit:EMail {OFF|ON|<NR1>}
LIMit:EMail?
Arguments
OFF disables generating an e-mail when the source waveform ex ceeds the test
limits.
ON enables generating an e-mail when the source waveform exceeds the test limits.
<NR1> = 0 disables the e-mail feature so that when the source waveform data
exceeds the limits set b y the limit test, an e-mail is not generated; any other value
enables the e-mail feature so that when the source waveform data exceeds the
limits set b y the limit test, an e-mail is generate d. For querie s, a 0 is returned if
the e-mail feature is off; a 1 is returned if the e -mail feature is on.
2-268 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
