Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Arguments
<NRF> specifies
the value of the data HIGH reference level in volts.
Examples
SEARCH:SEARCH1:TRIGGER:A: DDRMEMORY:REFLEVEL:DATA:HIGH 1 sets
the data HIGH refere nce level to 1.0 volt.
SEARCH:SEARCH1:TRIGGER:A: DDRMEMORY:REFLEVEL:DATA:HIGH? might
return
:SEARCH:SEARCH1:TRIGGER:A:DD RMEMORY:REFLEVEL:DATA:HIGH
0.0000
, indicating that the data HIGH reference level is set to 0 volt.
SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATA:LOW
This command sets or queries the value of the data LOW reference level for a
DDR Memory analysis search to determine where to place a mark. You can set
the value only when AUTOREFLEVEL is Custom. <x> is the search number.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:DDRMemory:REFLevel:DATA:LOW <NRF>
SEARCH:SEARCH<x>:TRIGger: A:DDRMemory:REFLevel:DATA:LOW?
Related Commands
SEARCH:SEARCH<x>:TRIGger: A:DDRMemory:AUTOReflevel
Arguments
<NRF> specifiesthevalueofthedataLOWreferencele
vel in volts.
Examples
SEARCH:SEARCH1:TRIGGER:A: DDRMEMORY:REFLEVEL:DATA:LOW 0.2 sets
the data LOW reference level to 0.2 volt.
SEARCH:SEARCH1:TRIGGER:A: DDRMEMORY:REFLEVEL:DATA:LOW? might
return
:SEARCH:SEARCH1:TRIGGER:A: DDRMEMORY:REFLEVEL:DATA:LOW
200.0000E-3
, indicating that the data LOW reference level is set to 0.2 volt.
SEARCH:SEARCH<x>:TRIGger:A:DDRMemory:REFLevel:DATA:MID
This command sets or queries the value of the d ata MID reference level for a
DDR Memory analysis search to determine where to place a mark. You can set
the value only when AUTOREFLEVEL is Custom. <x> is the search number.
Group
Search and Mark
2-438 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English