Tektronix DPO70000 Series Programmer's Manual

Commands Listed in Alphabetical Order
This query alwa
ys returns BASE, indicating that the units for the horizontal bar
cursors are those o f the base waveform to which they were assigned.
Group
Cursor
Syntax
CURSor:HBArs:UNIts?
Examples
CURSOR:HBARS:UNITS? always returns :CURSOR:HBARS:UNITS BASE
indicating that the units for the horizontal bar cursors are base.
CURSor:LINESTyle
This command sets o
r queries the cursors line style used when cursors are
displayed.
Group
Cursor
Syntax
CURSor:LINESTyle {SOLID|DASHed|SDAS Hed}
CURSor:LINESTyle?
Arguments
SOLID displays the cursors as solid lines.
DASHed displays the cursors as dashed lines.
SDASHed displays the cursors as solid-dashed lines.
Examples
CURSOR:LINESTYLE SOLID displays the cursors as solid lines.
CURSOR:LINESTYLE? might return :CURSOR:LIN ESTYLE DASHED, indicating
that the cursors are displayed as dashed lines.
CURSor:MODe
This command sets or queries whether the two cursors move together in unison or
separately. This command is the equivalent of selecting Cursor Mode from the
Cursors menu, and then choosing from the drop-down list.
Group
Cursor
2-134 DPO7000, DPO70000/B and DSA7000/B Series Programmer Manual

Tektronix DPO70000 Series Specifications

General

Brand	Tektronix
Model	DPO70000 Series
Category	Test Equipment
Language	English